![](http://www.gnu-darwin.org/hexley-gd-sm.png)
|
SANE: Backends (Drivers)
The following table summarizes the backends/drivers distributed with sane-backends-1.0.14, and the hardware or software they support.
This is only a summary!
Please consult the manpages and the author-supplied webpages
for more detailed (and usually important) information
concerning each backend.
If you have new information or corrections, please file a
bug report
with as many details as possible. Also please tell us if your scanner
isn't mentioned in this list at all.
For an explanation of the tables, see the
legend.
There are tables for scanners,
still cameras,
video cameras,
APIs, and
meta backends.
Backends:
abaton,
agfafocus,
apple,
artec,
artec_eplus48u,
as6e,
avision,
bh,
canon,
canon630u,
canon_pp,
coolscan,
coolscan2,
epson,
fujitsu,
gt68xx,
hp,
hp5400,
hpsj5s,
ibm,
leo,
ma1509,
matsushita,
microtek,
microtek2,
mustek,
mustek_pp,
mustek_usb,
nec,
pie,
plustek,
plustek_pp,
ricoh,
s9036,
sceptre,
sharp,
sm3600,
SnapScan,
sp15c,
st400,
tamarack,
teco1,
teco2,
teco3,
u12,
umax,
umax1220u,
umax_pp,
unsupported
Manual page: sane-abaton
Manufacturer |
Model |
Interface |
Status |
Comment |
Abaton
| Scan 300/GS |
SCSI |
complete |
All known modes and functions supported |
Scan 300/S |
SCSI |
untested |
Untested, use with caution |
Manual page: sane-agfafocus
Manufacturer |
Model |
Interface |
Status |
Comment |
AGFA
| Focus GS Scanner |
SCSI |
untested |
6 bit gray |
Focus Lineart Scanner |
SCSI |
untested |
Lineart only? Untested. |
Focus II |
SCSI |
untested |
gray only |
Focus Color |
SCSI |
good |
3-pass |
Focus Color Plus |
SCSI |
good |
3-pass |
Siemens
| S9036 |
SCSI |
untested |
gray only |
Manual page: sane-apple
Manufacturer |
Model |
Interface |
Status |
Comment |
Apple
| Apple Scanner |
SCSI |
good |
4bit, 16 shades of gray |
OneScanner |
SCSI |
basic |
8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work. |
ColorOneScanner |
SCSI |
minimal |
truecolor (needs much work) but it scans in non color modes. |
Link(s):
http://www4.infi.net/~cpinkham/sane/sane-artec-doc.html
Manual page: sane-artec
Manufacturer |
Model |
Interface |
Status |
Comment |
Artec/Ultima
| AT3 |
SCSI |
complete |
all modes working |
A6000C |
SCSI |
complete |
all modes working |
A6000C PLUS |
SCSI |
complete |
f/w <= v1.92 basic, f/w >= v1.93 OK |
AT6 |
SCSI |
minimal |
First scan works, subsequent fail until scanner power cycle. |
AT12 |
SCSI |
complete |
all modes working |
AM12S |
SCSI |
complete |
all modes working |
BlackWidow
| BW4800SP |
SCSI |
complete |
rebadged Artec AT3 |
Plustek
| OpticPro 19200S |
SCSI |
complete |
rebadged Artec AM12S |
Link(s):
http://www.angelfire.com/linux/crapsite/
Manual page: sane-artec_eplus48u
Manufacturer |
Model |
Interface |
Status |
Comment |
Artec/Ultima
| E+ 48U |
USB |
good |
CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners. |
Medion/Lifetec/Tevion/Cytron
| MD9693 |
USB |
good |
|
MD9705 |
USB |
good |
|
MD4394 |
USB |
good |
Only scanners with product id 0x4003 will work; try the gt68xx backend, if your scanner has product id 0x4002 |
Trust
| Easy Webscan 19200 |
USB |
good |
Different product id: 0x4006 |
Memorex
| MEM 48U |
USB |
good |
Different product id: 0x4005 |
Microstar
| MR 9791 |
USB |
good |
|
UMAX
| AstraSlim SE |
USB |
good |
Different product id: 0x4009 |
Artec/Ultima
| E+ Pro |
USB |
minimal |
Experimental! Different product id: 0x4004. Please report your results! |
Link(s):
http://as6edriver.sourceforge.net/
Manual page: sane-as6e
Manufacturer |
Model |
Interface |
Status |
Comment |
Artec/Ultima
| AS6E |
Parport |
basic |
Requires the program 'as6edriver' to run. |
Link(s):
http://www.rocklinux-consulting.de/oss/avision/index.html
Manual page: sane-avision
Manufacturer |
Model |
Interface |
Status |
Comment |
Avision
| AV100CS |
SCSI |
untested |
|
AV100IIICS |
SCSI |
untested |
|
AV100S |
SCSI |
untested |
|
AV210 |
USB |
untested |
|
AV220 |
USB |
untested |
|
AV240SC |
SCSI |
untested |
|
AV260CS |
SCSI |
untested |
|
AV360CS |
SCSI |
untested |
|
AV363CS |
SCSI |
untested |
|
AV420CS |
SCSI |
untested |
|
AV6120 |
SCSI |
untested |
|
AV610CU Scancopier |
USB |
untested |
1 pass, 600 dpi |
AV620CS |
SCSI |
complete |
1 pass, 600 dpi |
AV620CS Plus |
SCSI |
complete |
1 pass, 1200 dpi |
AV630CS |
SCSI |
complete |
1 pass, 1200 dpi - regularly tested |
AV630CSL |
SCSI |
untested |
1 pass, 1200 dpi |
AV6240 |
SCSI |
complete |
1 pass, ??? dpi |
AV600U |
USB |
untested |
1 pass, 1200 dpi |
AV600U Plus |
USB |
untested |
1 pass, 1200 dpi |
AV660S |
USB |
untested |
1 pass, 1200 dpi |
AV680S |
USB |
untested |
1 pass, 1200 dpi |
AV690U |
USB |
untested |
1 pass, 2400 dpi |
AV800S |
SCSI |
untested |
1 pass, 1200 dpi |
AV810C |
SCSI |
untested |
1 pass, 1200 dpi |
AV820 |
SCSI |
untested |
1 pass, 1200 dpi |
AV820C |
SCSI |
untested |
1 pass, 1200 dpi |
AV820C Plus |
SCSI |
untested |
1 pass, 1200 dpi |
AV830C |
SCSI |
untested |
1 pass, 1200 dpi |
AV830C Plus |
SCSI |
untested |
1 pass, 1200 dpi |
AV880 |
SCSI |
untested |
1 pass, 1200 dpi |
AV880C |
SCSI |
untested |
1 pass, 1200 dpi |
AV8000S |
SCSI |
complete |
1 pass, 1200 dpi, A3 - regularly tested |
AVA3 |
SCSI |
untested |
1 pass, 600 dpi, A3 |
Hewlett-Packard
| ScanJet 5300C |
USB |
complete |
1 pass, 1200 dpi - regularly tested |
ScanJet 5370C |
USB |
basic |
1 pass, 2400 dpi |
ScanJet 7400c |
USB |
good |
1 pass, 1200 dpi - dual USB/SCSI interface |
ScanJet 7450c |
USB |
good |
1 pass, 1200 dpi - dual USB/SCSI interface |
ScanJet 7490c |
USB |
good |
1 pass, 1200 dpi - dual USB/SCSI interface |
Minolta
| FS-V1 |
USB |
basic |
1 pass, film-scanner |
Elite II |
USB |
untested |
1 pass, film-scanner |
Mitsubishi
| MCA-ADFC |
SCSI |
untested |
|
S1200C |
SCSI |
untested |
|
S600C |
SCSI |
untested |
|
SS600 |
SCSI |
good |
|
Fujitsu
| ScanPartner |
SCSI |
untested |
|
ScanPartner 10 |
SCSI |
untested |
|
ScanPartner 10C |
SCSI |
untested |
|
ScanPartner 15C |
SCSI |
untested |
|
ScanPartner 300C |
SCSI |
untested |
|
ScanPartner 600C |
SCSI |
untested |
|
ScanPartner Jr |
SCSI |
untested |
|
ScanStation |
SCSI |
untested |
|
Link(s):
http://www.martoneconsulting.com/sane-bh.html
Manual page: sane-bh
Comment: Supports Copiscan II scanners with Remote SCSI Controller (RSC) interface
Manufacturer |
Model |
Interface |
Status |
Comment |
Bell and Howell
| COPISCAN II 6338 |
SCSI |
good |
Duplex Scanner with ACE - development model |
COPISCAN II 2135 |
SCSI |
untested |
Simplex Scanner |
COPISCAN II 2137(A) |
SCSI |
good |
Simplex Scanner (with ACE) - limited testing |
COPISCAN II 2138A |
SCSI |
untested |
Simplex Scanner with ACE |
COPISCAN II 3238 |
SCSI |
untested |
Simplex Scanner |
COPISCAN II 3338(A) |
SCSI |
untested |
Simplex Scanner (with ACE) |
Link(s):
http://www.rzg.mpg.de/~mpd/sane/
Manual page: sane-canon
Manufacturer |
Model |
Interface |
Status |
Comment |
Canon
| CanoScan 300 |
SCSI |
good |
1 pass; flatbed scanner |
CanoScan 600 |
SCSI |
good |
|
CanoScan 620S |
SCSI |
good |
1 pass; flatbed scanner |
CanoScan 1200S |
SCSI |
good |
1 pass; flatbed scanner |
CanoScan 2700F |
SCSI |
good |
1 pass; film scanner |
CanoScan 2710S |
SCSI |
good |
1 pass; 36bit film scanner |
Link(s):
http://canon-fb630u.sourceforge.net/
Manual page: sane-canon630u
Manufacturer |
Model |
Interface |
Status |
Comment |
Canon
| CanoScan fb630u |
USB |
good |
OK |
CanoScan fb636u |
USB |
untested |
hopefully works |
Link(s):
http://canon-fb330p.sourceforge.net
Manual page: sane-canon_pp
Manufacturer |
Model |
Interface |
Status |
Comment |
Canon
| CanoScan FB310P |
Parport (ECP) |
unsupported |
Rebadged Avision, different command set |
CanoScan FB610P |
Parport (ECP) |
unsupported |
Rebadged Avision, different command set |
CanoScan FB320P |
Parport (ECP) |
basic |
Newly added support |
CanoScan FB620P |
Parport (ECP) |
basic |
Newly added support |
CanoScan FB330P |
Parport (ECP) |
good |
|
CanoScan FB630P |
Parport (ECP) |
good |
|
CanoScan N340P |
Parport (ECP) |
good |
|
CanoScan N640P |
Parport (ECP) |
good |
|
CanoScan N640P ex |
Parport (ECP) |
good |
Just an N640P in a different box? |
Link(s):
http://andreas.rick.free.fr/sane/
Manual page: sane-coolscan
Manufacturer |
Model |
Interface |
Status |
Comment |
Nikon
| LS-20 |
SCSI |
basic |
The LS-20 has been replaced by the LS-30 |
LS-30 |
SCSI |
basic |
alpha: only 24/30 bit RGB + 32/40 bit RGBI |
LS-2000 |
SCSI |
basic |
alpha: only 24/36 bit + RGB 32/48 bit RGBI |
LS-1000 |
SCSI |
basic |
Doesn't support gamma correction |
Link(s):
http://coolscan2.sourceforge.net/
Manual page: sane-coolscan2
Manufacturer |
Model |
Interface |
Status |
Comment |
Nikon
| LS 30 |
SCSI |
complete |
working -- model available to developer |
LS 2000 |
SCSI |
good |
|
LS 40 ED |
USB |
complete |
|
LS 4000 ED |
IEEE-1394 |
good |
needs linux kernel 2.4.19 or later |
LS 8000 ED |
IEEE-1394 |
good |
needs linux kernel 2.4.19 or later |
Link(s):
http://www.khk.net/sane
Manual page: sane-epson
Manufacturer |
Model |
Interface |
Status |
Comment |
Epson
| GT-5000 |
Parport |
good |
|
Actionscanner II |
Parport |
good |
US version of GT-5000 |
GT-6000 |
SCSI Parport |
good |
|
ES-300C |
SCSI Parport |
good |
US version of GT-6000 |
GT-5500 |
SCSI |
good |
|
GT-6500 |
Parport |
good |
|
ES-600C |
Parport |
good |
US version of GT-6500 |
ES-1200C |
Parport |
good |
US version of GT-9000 |
GT-7000 |
SCSI |
good |
|
GT-8000 |
SCSI |
good |
|
ES-8500 |
SCSI |
good |
|
Perfection 636S |
SCSI |
complete |
US version of GT-7000 |
Perfection 636U |
USB |
complete |
|
Perfection 610 |
USB |
complete |
|
Perfection 640 |
USB |
complete |
|
Perfection 1200S |
SCSI |
complete |
|
Perfection 1200U |
USB |
complete |
|
Perfection 1200Photo |
USB |
complete |
with TPU |
Perfection 1240 |
SCSI USB |
complete |
|
Perfection 1640 |
SCSI USB |
complete |
|
Perfection 1650 |
USB |
complete |
|
Perfection 1660 |
USB |
complete |
|
Perfection 2400 |
USB |
complete |
|
Perfection 2450 |
USB IEEE-1394 |
complete |
|
Perfection 3200 |
USB |
complete |
US version of the GT-9800 |
Perfection 4870 |
USB |
complete |
US version of the GT-9800 |
Expression 636 |
SCSI |
complete |
US version of GT-9500 |
Expression 800 |
SCSI |
complete |
|
Expression 1600 |
SCSI USB IEEE-1394 |
complete |
|
Expression 1680 |
SCSI USB IEEE-1394 |
complete |
|
FilmScan 200 |
SCSI |
unsupported |
A better backend for the FilmScan 200 can be found at http://www.vjet.demon.co.uk/scanner/ |
CX-3200 |
USB |
good |
|
CX-5200 |
USB |
good |
|
CX-6400 |
USB |
good |
|
Manual page: sane-fujitsu
Manufacturer |
Model |
Interface |
Status |
Comment |
Fujitsu
| M3096G |
SCSI |
good |
|
M3091DCd |
SCSI |
good |
|
M3092DCd |
SCSI |
good |
|
M3093GXim |
SCSI |
good |
|
M3093GDim |
SCSI |
good |
|
M4097 |
SCSI |
good |
|
ScanPartner 93GX |
SCSI |
good |
|
fi-4120C |
SCSI USB |
basic |
|
fi-4220C |
SCSI USB |
basic |
|
fi-4340C |
SCSI |
basic |
Color scans are inverted, Flatbed option is enabled |
fi-4530C |
SCSI USB |
basic |
USB untested |
Link(s):
http://www.meier-geinitz.de/sane/gt68xx-backend/
Manual page: sane-gt68xx
Comment: Only the USB scanners mentioned below are supported. For other Mustek BearPaws, look at the Plustek and the MA-1509 backend.
Manufacturer |
Model |
Interface |
Status |
Comment |
Artec/Ultima
| Ultima 2000 |
USB |
good |
Works, only product id 0x4002 is supported |
Ultima 2000 e+ |
USB |
good |
Works, only limited testing until now |
Boeder
| Sm@rtScan Slim Edition |
USB |
good |
Similar to Artec Ultima 2000 |
Fujitsu
| 1200CUS |
USB |
basic |
Works, but is slow. Maybe a Mustek BearPaw 2400 CU clone? |
Genius
| Colorpage Vivid3x |
USB |
good |
|
Colorpage Vivid3 V2 |
USB |
good |
Same as Colorpage Vivid3x |
Colorpage Vivid3xe |
USB |
good |
|
Colorpage Vivid4 |
USB |
good |
Works. |
Colorpage Vivid4x |
USB |
basic |
Should work but has limited testing. Please contact me if you own such a device. |
Colorpage Vivid4xe |
USB |
basic |
Should work but has limited testing. Please contact me if you own such a device. |
Colorpage Vivid 1200 EX |
USB |
untested |
Should be detected but may not work. |
Googlegear
| 2000 |
USB |
good |
Same as Artec Ultima 2000. |
Lexmark
| X70 |
USB |
good |
Works, some resolutions fail at 16 bit |
X73 |
USB |
good |
Works, some resolutions fail at 16 bit, same as X70 |
Medion/Lifetec/Tevion/Cytron
| MD 4394 |
USB |
good |
Product id 0x4002. If you have 0x4003, use artec_eplus48u backend. |
MD/LT 9375 |
USB |
untested |
Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test. |
MD/LT 9385 |
USB |
good |
Similar to Artec Ultima 2000 |
LT 9452 |
USB |
good |
Similar to Mustek ScanExpress 1200 UB Plus |
MD 9458 |
USB |
good |
Similar to Artec Ultima 2000 (e+?) |
Mustek
| BearPaw 1200 CS |
USB |
good |
|
BearPaw 1200 CU |
USB |
good |
|
BearPaw 1200 CU Plus |
USB |
good |
|
BearPaw 1200 TA |
USB |
good |
Transparency adapter supported |
BearPaw 2400 CS |
USB |
untested |
Probably works, reports are welcome |
BearPaw 2400 CS Plus |
USB |
good |
Works, problems with 12/16 bit modes? |
BearPaw 2400 CU |
USB |
basic |
Works, but is slow |
BearPaw 2400 CU Plus |
USB |
good |
|
BearPaw 2400 TA |
USB |
good |
Transparency adapter supported |
BearPaw 2400 TA Plus |
USB |
good |
Transparency adapter supported |
BearPaw 2448 CS Plus |
USB |
good |
Actually untested, but should be the same as 2448 TA Plus, but without TA. |
BearPaw 2448 TA Plus |
USB |
good |
Transparency adapter supported. Brightness depends on resolution? |
Plug-n-Scan 2400 MT |
USB |
good |
Works but is slow in high resolutions. Same as BearPaw 2400 TA Plus. |
Plug-n-Scan 2400 M |
USB |
good |
Works but is slow in high resolutions. Same as BearPaw 2400 CS Plus. |
ScanExpress 1200 UB Plus |
USB |
good |
|
ScanExpress A3 USB |
USB |
good |
|
ScanExpress 2400 USB |
USB |
minimal |
Should be detected but may need some more work in the code. Testers welcome. |
ScanMagic 1200 UB Plus |
USB |
good |
Same as ScanExpress 1200 UB Plus |
Packard Bell
| Diamond 1200 |
USB |
good |
Similar to Mustek BearPaw 1200 (Plus) |
Diamond 1200 Plus |
USB |
good |
Similar to Mustek BearPaw 1200 Plus |
Diamond 2450 |
USB |
basic |
|
Plustek
| OpticPro 1248U |
USB |
good |
Works up to 600 dpi. |
OpticPro U16B |
USB |
good |
Works upto 600 dpi. |
OpticPro U16B+ |
USB |
untested |
Probably works. Please tell me if you own such a device. |
OpticPro UT16B |
USB |
untested |
Probably works. Transparency adapter not supported yet. Please contact me if you own such a device. |
OpticSlim 1200 |
USB |
good |
|
OpticSlim 2400 |
USB |
basic |
Calibration doesn't seem to work correctly on all scanners yet. Needs more testing. Please tell me how well this scanner works. |
RevScan
| 19200i |
USB |
good |
Similar to Plustek OpticPro 1248U |
Trust
| Flat Scan USB 19200 |
USB |
good |
Similar to Artec Ultima 2000 |
Compact Scan USB 19200 |
USB |
good |
Works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus) |
Visioneer
| OneTouch 7300 |
USB |
untested |
Should be detected but may not work. Please tell me if you own such a device. |
Link(s):
http://www.kirchgessner.net/
Manual page: sane-hp
Manufacturer |
Model |
Interface |
Status |
Comment |
Hewlett-Packard
| ScanJet Plus |
Propietary |
complete |
Driver for HP parallel interface card required |
ScanJet IIc |
SCSI |
complete |
|
ScanJet IIp |
SCSI |
complete |
|
ScanJet IIcx |
SCSI |
complete |
|
ScanJet 3c |
SCSI |
complete |
|
ScanJet 3p |
SCSI |
complete |
|
ScanJet 4c |
SCSI |
complete |
|
ScanJet 4p |
SCSI |
complete |
|
ScanJet 4100C |
USB |
complete |
|
ScanJet 5p |
SCSI |
complete |
|
ScanJet 5100C |
Parport |
complete |
Requires ppscsi driver and epst module |
ScanJet 5200C |
Parport USB |
complete |
Parallel interface requires ppscsi driver and epst module |
ScanJet 6100C |
SCSI |
complete |
|
ScanJet 6200C |
SCSI USB |
complete |
|
ScanJet 6250C |
SCSI USB |
complete |
|
ScanJet 6300C |
SCSI USB |
complete |
|
ScanJet 6350C |
SCSI USB |
complete |
|
ScanJet 6390C |
SCSI USB |
complete |
|
PhotoSmart PhotoScanner |
SCSI |
complete |
|
Link(s):
http://sourceforge.net/projects/hp5400backend
Manual page: sane-hp5400
Comment: HP5400 and HP5470 scanners. Prototype backend available
Manufacturer |
Model |
Interface |
Status |
Comment |
Hewlett-Packard
| ScanJet 5400c |
USB |
basic |
|
ScanJet 5470c |
USB |
basic |
|
ScanJet 5490c |
USB |
basic |
|
Link(s):
http://hpsj5s.sourceforge.net/
Manual page: sane-hpsj5s
Manufacturer |
Model |
Interface |
Status |
Comment |
Hewlett-Packard
| ScanJet 5s |
Parport (EPP) |
minimal |
Requires libieee1284 library. Only gray mode. |
Link(s):
http://www.meier-geinitz.de/sane/ibm-backend/
Manual page: sane-ibm
Comment: This backend has had only limited testing. It needs more work especially for the Ricoh scanners. Patches are welcome.
Manufacturer |
Model |
Interface |
Status |
Comment |
IBM
| 2456 |
SCSI |
basic |
Was reported to work long time ago. Reports are welcome. |
Ricoh
| IS-410 |
SCSI |
untested |
Untested, please report! |
IS-420 |
SCSI |
basic |
Works at least in flatbed mode. |
IS-430 |
SCSI |
untested |
Untested, please report! |
Link(s):
http://www.zago.net/sane/#leo
Manual page: sane-leo
Manufacturer |
Model |
Interface |
Status |
Comment |
LEO
| LEOScan S3 |
SCSI |
good |
FCC ID LUZFS1130 |
Across Technologies
| FS-1130 |
SCSI |
good |
FCC ID LUZFS1130 |
Genius
| FS-1130 Colorpage Scanner |
SCSI |
untested |
|
Link(s):
http://www.meier-geinitz.de/sane/ma1509-backend/
Manual page: sane-ma1509
Manufacturer |
Model |
Interface |
Status |
Comment |
Mustek
| BearPaw 1200 F |
USB |
good |
Works upto 600 dpi. No support for TA and ADF yet. |
Fujitsu
| fi-4110EOX2 |
USB |
unsupported |
Uses ma1509 chip, but very different from other scanners supported by backend |
Link(s):
http://www.zago.net/sane
Manual page: sane-matsushita
Manufacturer |
Model |
Interface |
Status |
Comment |
Panasonic
| KV-SS25 |
SCSI |
complete |
|
KV-SS25D |
SCSI |
complete |
|
KV-SS50 |
SCSI |
untested |
|
KV-SS55 |
SCSI |
untested |
|
KV-SS50EX |
SCSI |
untested |
|
KV-SS55EX |
SCSI |
good |
|
KV-SS850 |
SCSI |
untested |
|
KV-SS855 |
SCSI |
untested |
|
KV-S2025C |
SCSI |
minimal |
|
KV-S2045C |
SCSI |
minimal |
|
KV-S2065L |
SCSI |
good |
|
Link(s):
http://www.mir.com/mtek/
Manual page: sane-microtek
Manufacturer |
Model |
Interface |
Status |
Comment |
Microtek
| Scanmaker E6 |
SCSI |
good |
|
Scanmaker E3 |
SCSI |
good |
|
Scanmaker E2 |
SCSI |
good |
3-pass |
Scanmaker 35t+ |
SCSI |
good |
slide-scanner |
Scanmaker 45t |
SCSI |
good |
slide-scanner |
Scanmaker 35 |
SCSI |
good |
slide-scanner |
Scanmaker III |
SCSI |
good |
|
Scanmaker IISP |
SCSI |
good |
|
Scanmaker IIHR |
SCSI |
good |
3-pass |
Scanmaker IIG |
SCSI |
good |
gray only |
Scanmaker II |
SCSI |
good |
3-pass |
Scanmaker 600Z(S) |
SCSI |
untested |
|
Scanmaker 600G(S) |
SCSI |
basic |
gray only (see manpage) |
Color PageWiz |
SCSI (Parport) |
basic |
sheet-fed (preliminary, see mapage) |
Agfa
| Arcus II |
SCSI |
good |
Arcus *II*, not Arcus! |
StudioScan |
SCSI |
good |
|
StudioScan II |
SCSI |
good |
|
StudioScan IIsi |
SCSI |
good |
|
Studiostar |
SCSI |
minimal |
Is detected but scans are very dark |
DuoScan |
SCSI |
basic |
|
Vobis
| Highscreen Realscan |
SCSI |
good |
|
Genius
| Colorpage-SP2 |
SCSI |
good |
Same as Microtek Scanmaker E3 |
Link(s):
http://karstenfestag.gmxhome.de
Manual page: sane-microtek2
Manufacturer |
Model |
Interface |
Status |
Comment |
Microtek
| ScanMaker E3plus |
Parport |
complete |
|
ScanMaker E3plus |
SCSI |
complete |
|
ScanMaker X6 |
SCSI |
complete |
|
ScanMaker X6EL |
SCSI |
basic |
|
ScanMaker X6USB |
USB |
good |
|
ScanMaker V300 |
SCSI |
good |
|
ScanMaker V300 |
Parport |
good |
|
ScanMaker V310 |
SCSI |
basic |
|
ScanMaker V310 |
Parport |
basic |
|
ScanMaker V600 |
SCSI |
basic |
|
ScanMaker V600 |
Parport |
basic |
|
ScanMaker 330 |
SCSI |
basic |
|
ScanMaker 630 |
SCSI |
basic |
|
ScanMaker 636 |
SCSI |
complete |
|
ScanMaker 9600XL |
SCSI |
good |
only flatbed mode ? |
Phantom 330CX |
Parport |
complete |
|
SlimScan C3 |
Parport |
complete |
|
Phantom 636 |
SCSI |
complete |
|
Phantom 636CX |
Parport |
complete |
|
SlimScan C6 |
USB |
complete |
|
ScanMaker V6USL |
SCSI |
complete |
|
ScanMaker V6USL |
USB |
complete |
|
ScanMaker X12USL |
SCSI |
good |
only Flatbed mode ? |
Vobis
| HighScan |
SCSI |
complete |
only E3plus based models |
Scanport
| SQ300 |
Parport? |
basic |
|
SQ2030 |
Parport |
basic |
|
SQ4836 |
SCSI |
basic |
|
Link(s):
http://www.meier-geinitz.de/sane/mustek-backend/
Manual page: sane-mustek
Comment: Most Mustek SCSI scanners are supported by this backend. For USB scanners, look at the mustek_usb backend.
Manufacturer |
Model |
Interface |
Status |
Comment |
Mustek
| Paragon MFS-6000CX |
SCSI |
good |
3-pass |
Paragon MFS-12000CX |
SCSI |
good |
3-pass |
Paragon MFC-600S |
SCSI |
complete |
|
Paragon 600 II CD |
SCSI |
complete |
|
Paragon 600 II ED |
Parport |
untested |
Completely untested. If it's the same as the 600 II EP, it may work. Please contact me if you own such a device. |
Paragon 600 II EP |
Parport |
untested |
Not tested yet but should work. Please contact me if you own such a device. |
ScanMagic 600 II SP |
SCSI |
complete |
|
Paragon MFC-800S |
SCSI |
complete |
|
Paragon 800 II SP |
SCSI |
complete |
|
Paragon MFS-6000SP |
SCSI |
complete |
|
Paragon MFS-8000SP |
SCSI |
complete |
|
Paragon MFS-1200SP |
SCSI |
complete |
|
Paragon MFS-12000SP |
SCSI |
complete |
|
ScanExpress 6000SP |
SCSI |
complete |
|
ScanExpress 12000SP |
SCSI |
complete |
|
ScanExpress 1200 FS |
SCSI |
untested |
One report that it crashes the computer. SCSI driver issue? Please contact me if you own such a device. |
ScanExpress 12000SP Plus |
SCSI |
complete |
|
Paragon 1200 III SP |
SCSI |
complete |
|
Paragon 1200 LS |
SCSI |
complete |
|
ScanMagic 9636S |
SCSI |
complete |
|
ScanMagic 9636S Plus |
SCSI |
complete |
|
ScanExpress A3 SP |
SCSI |
basic |
Please test! |
Paragon 1200 SP Pro |
SCSI |
good |
|
Paragon 1200 A3 Pro |
SCSI |
good |
|
Paragon 600 II N |
Proprietary |
basic |
Resolutions above 300 dpi may cause trouble. |
Trust
| Imagery 1200 |
SCSI |
good |
3-pass, Mustek Paragon MFS-6000CX compatible |
Imagery 1200 SP |
SCSI |
complete |
Mustek Paragon MFS-6000SP compatible |
Imagery 4800 SP |
SCSI |
complete |
Mustek Paragon 600 II CD compatible |
SCSI Connect 19200 |
SCSI |
complete |
Mustek ScanExpress 12000SP compatible |
SCSI excellence series 19200 |
SCSI |
complete |
Mustek ScanExpress 12000SP compatible |
Primax
| Compact 4800 SCSI |
SCSI |
complete |
Mustek 600 II CD compatible |
Link(s):
http://penguin-breeder.org/sane/mustek_pp/
Manual page: sane-mustek_pp
Comment: Supports CIS and CCD type parallel port scanners from Mustek.
Manufacturer |
Model |
Interface |
Status |
Comment |
Mustek
| ScanExpress 6000 P |
Parport (EPP) |
good |
300 dpi CCD scanner |
ScanExpress 600 SEP |
Parport (EPP) |
good |
300 dpi CCD scanner |
ScanMagic 4800 P |
Parport (EPP) |
good |
300 dpi CCD scanner |
600 III EP Plus |
Parport (EPP) |
good |
300 dpi CCD scanner |
96 CP |
Parport (EPP) |
good |
300x600 dpi CIS scanner |
ScanExpress 600 CP |
Parport (EPP) |
good |
300x600 dpi CIS scanner |
ScanMagic 600 CP |
Parport (EPP) |
good |
300x600 dpi CIS scanner |
ScanExpress 1200 CP |
Parport (EPP) |
good |
600x1200 dpi CIS scanner |
ScanExpress 1200 CP+ |
Parport (EPP) |
good |
600x1200 dpi CIS scanner |
Medion/Lifetec/Tevion/Cytron
| MD 9848 |
Parport (EPP) |
good |
300 dpi CCD scanner |
MD/LT 935x |
Parport (EPP) |
good |
600x1200 dpi CIS scanner |
MD/LT 985x |
Parport (EPP) |
good |
600x1200 dpi CIS scanner |
MD/LT 9890 |
Parport (EPP) |
good |
600x1200 dpi CIS scanner |
Targa
| Funline TS12 EP |
Parport (EPP) |
good |
600x1200 dpi CIS scanner |
Funline TS6 EP |
Parport (EPP) |
good |
300x600 dpi CIS scanner |
Trust
| Easy Connect 9600+ |
Parport (EPP) |
good |
300x600 dpi CIS scanner |
Easy Connect 19200+ |
Parport (EPP) |
good |
300x600 dpi CIS scanner |
Viviscan
| Compact II |
Parport (EPP) |
good |
300 dpi CCD scanner |
Cybercom
| 9352 |
Parport (EPP) |
good |
300 dpi CCD scanner |
Gallery
| 4800 |
Parport (EPP) |
good |
300 dpi CCD scanner |
Link(s):
http://www.meier-geinitz.de/sane/mustek_usb-backend/
Manual page: sane-mustek_usb
Comment: Only the USB scanners mentioned below are supported. For BearPaws, look at the Plustek, MA-1509, and gt68xx backends.
Manufacturer |
Model |
Interface |
Status |
Comment |
Mustek
| ScanExpress 600 CU |
USB |
complete |
|
ScanExpress 1200 CU |
USB |
complete |
|
ScanExpress 1200 CU Plus |
USB |
complete |
|
ScanExpress 1200 UB |
USB |
complete |
For the UB Plus, see gt68xx backend |
Trust
| Compact Scan USB 19200 |
USB |
complete |
Mustek 1200 UB compatible |
Link(s):
http://www5a.biglobe.ne.jp/~saetaka/
Manual page: sane-nec
Manufacturer |
Model |
Interface |
Status |
Comment |
NEC
| PC-IN500/4C |
SCSI |
good |
PC-IN500/4C was sold only in JAPAN |
Link(s):
http://www.munton.demon.co.uk/sane
Manual page: sane-pie
Manufacturer |
Model |
Interface |
Status |
Comment |
Devcom
| 9636PRO |
SCSI |
good |
|
9636S |
SCSI |
untested |
|
9630S |
SCSI |
untested |
|
PIE
| ScanAce 1236S |
SCSI |
good |
|
ScanAce 1230S |
SCSI |
good |
|
ScanAce II |
SCSI |
untested |
|
ScanAce III |
SCSI |
good |
|
ScanAce Plus |
SCSI |
untested |
|
ScanAce II Plus |
SCSI |
untested |
|
ScanAce III Plus |
SCSI |
untested |
|
ScanAce V |
SCSI |
untested |
|
ScanAce ScanMedia |
SCSI |
untested |
|
ScanAce ScanMedia II |
SCSI |
untested |
|
ScanAce 630S |
SCSI |
untested |
|
ScanAce 636S |
SCSI |
untested |
|
Adlib
| JetScan630 |
SCSI |
good |
|
JetScan636PRO |
SCSI |
untested |
|
Link(s):
http://www.gjaeger.de/scanner/plustek.html
Manual page: sane-plustek
Manufacturer |
Model |
Interface |
Status |
Comment |
Plustek
| OpticPro U12 |
USB |
complete |
NOTE: Devices with product ID 0x0001 are not supported! |
OpticPro UT12 |
USB |
complete |
Note: Devices with product ID 0x0001 are not supported! |
OpticPro UT16 |
USB |
complete |
|
OpticPro U24 |
USB |
complete |
|
OpticPro UT24 |
USB |
complete |
|
OpticPro 19200S |
SCSI |
unsupported |
rebadged Artec AM12S (supported by Artec Backend) |
Genius
| Colorpage HR6 V2 |
USB |
complete |
|
Colorpage HR7 |
USB |
complete |
|
Colorpage HR6A |
USB |
untested |
|
Colorpage HR7LE |
USB |
untested |
|
Colorpage HR6X |
USB |
untested |
|
Mustek
| BearPaw 1200 |
USB |
complete |
both product versions are supported, see backends' man-page |
BearPaw 2400 |
USB |
complete |
|
Hewlett-Packard
| ScanJet 2100C |
USB |
complete |
|
ScanJet 2200C |
USB |
complete |
|
Epson
| Perfection 1250 |
USB |
complete |
|
Perfection 1250Photo |
USB |
good |
TPA scans not perfect |
Perfection 1260 |
USB |
complete |
|
Perfection 1260Photo |
USB |
good |
TPA scans not perfect |
Umax
| UMAX 3400 |
USB |
complete |
|
UMAX 3450 |
USB |
good |
TPA not supported |
UMAX 5400 |
USB |
complete |
|
Compaq
| S4-100 |
USB |
complete |
Identical to UMAX 3400 |
Canon
| CanoScan N650U/N656U |
USB |
complete |
|
CanoScan N1220U |
USB |
complete |
|
CanoScan N670U/N676U |
USB |
complete |
|
CanoScan N1240U |
USB |
complete |
|
CanoScan LiDE20 |
USB |
complete |
|
CanoScan LiDE30 |
USB |
complete |
|
CanoScan D660U |
USB |
basic |
Binary and gray mode not working |
Link(s):
http://www.gjaeger.de/scanner/plustek.html
Manual page: sane-plustek_pp
Manufacturer |
Model |
Interface |
Status |
Comment |
Plustek
| OpticPro 4800P |
Parport (SPP, EPP) |
complete |
|
OpticPro 4830P |
Parport (SPP, EPP) |
complete |
|
OpticPro 600P/6000P |
Parport (SPP, EPP) |
complete |
|
OpticPro 4831P |
Parport (SPP, EPP) |
complete |
|
OpticPro 9630P |
Parport (SPP, EPP) |
complete |
|
OpticPro 9630PL |
Parport (SPP, EPP) |
complete |
use driver-switch mov=1 |
OpticPro 9600P |
Parport (SPP, EPP) |
complete |
|
OpticPro 1236P |
Parport (SPP, EPP) |
complete |
reported as OpticPro 12000P/96000P |
OpticPro 12000P/96000P |
Parport (SPP, EPP) |
complete |
|
OpticPro 9636P |
Parport (SPP, EPP) |
complete |
use driver-switch mov=4 |
OpticPro 9636P+/Turbo |
Parport (SPP, EPP) |
complete |
use driver-switch mov=3 |
OpticPro 9636T |
Parport (SPP, EPP) |
complete |
|
OpticPro 12000T |
Parport (SPP, EPP) |
complete |
|
OpticPro AI3 |
Parport (SPP, EPP) |
basic |
use driver-switch mov=5, poor picture quality |
OpticPro P8 |
Parport |
untested |
|
OpticPro P12 |
Parport (SPP, EPP) |
complete |
|
OpticPro PT12 |
Parport (SPP, EPP) |
complete |
|
Primax
| Colorado 4800 |
Parport (SPP, EPP) |
untested |
same as OpticPro 4800P |
Compact 4800 Direct |
Parport (SPP, EPP) |
complete |
use driver-switch mov=2 |
Compact 4800 Direct-30 |
Parport (SPP, EPP) |
complete |
same as OpticPro 4830P, use driver-switch mov=7 |
Compact 9600 Direct-30 |
Parport (SPP, EPP) |
complete |
same as OpticPro 9630P |
Genius
| Colorpage Vivid III V2 |
Parport (SPP, EPP) |
complete |
Reported as PT12 |
Colorpage Vivid Pro II Film |
Parport (SPP, EPP) |
complete |
Reported as OP9636T/12000T |
Colorpage HR6X EPP |
Parport (SPP, EPP) |
good |
Negative scanning does not work correctly |
Aries
| Scan-It Pro 4800 |
Parport (SPP, EPP) |
complete |
use driver-switch mov=2 |
BrightScan
| BrighScan OpticPro |
Parport (SPP, EPP) |
complete |
Reported as P12 |
Manual page: sane-ricoh
Manufacturer |
Model |
Interface |
Status |
Comment |
Ricoh
| Ricoh IS50 |
SCSI |
basic |
|
Ricoh IS60 |
SCSI |
basic |
|
Manual page: sane-s9036
Manufacturer |
Model |
Interface |
Status |
Comment |
Siemens
| 9036 Flatbed scanner |
SCSI |
basic |
|
Link(s):
http://www.zago.net/sane/
Manual page: sane-sceptre
Manufacturer |
Model |
Interface |
Status |
Comment |
Sceptre
| Vividscan S1200 |
SCSI |
basic |
|
Komodo
| S1200 |
SCSI |
untested |
rebadged Sceptre S1200 |
Link(s):
http://www.satzbau-gmbh.de/staff/abel/sane-sharp.html
Manual page: sane-sharp
Manufacturer |
Model |
Interface |
Status |
Comment |
Sharp
| JX-610 |
SCSI |
good |
|
JX-250 |
SCSI |
good |
|
JX-320 |
SCSI |
good |
|
JX-325 |
SCSI |
untested |
|
JX-330 |
SCSI |
good |
|
JX-350 |
SCSI |
good |
|
Link(s):
http://sm3600.sourceforge.net/
Manual page: sane-sm3600
Manufacturer |
Model |
Interface |
Status |
Comment |
Microtek
| ScanMaker 3600 |
USB |
basic |
works |
ScanMaker 3700 |
USB |
basic |
works |
ScanMaker 3750 |
USB |
basic |
works (told) |
Link(s):
http://snapscan.sourceforge.net/
Manual page: sane-snapscan
Comment: Supported bit depths: 24 bit (color), 8 bit (gray)
Manufacturer |
Model |
Interface |
Status |
Comment |
AGFA
| SnapScan |
SCSI |
good |
|
SnapScan 300 |
SCSI |
good |
|
SnapScan 310 |
SCSI |
good |
|
SnapScan 600 |
SCSI |
good |
Optional ADF supported. |
Arcus 1200 |
SCSI |
good |
Optional transparency unit supported. |
SnapScan 1236s |
SCSI |
good |
Optional ADF and transparency unit supported. |
SnapScan 1236u |
USB |
good |
Optional ADF and transparency unit supported. |
SnapScan 1212u |
USB |
good |
|
SnapScan e10 |
USB |
good |
|
SnapScan e20 |
USB |
good |
|
SnapScan e25 |
USB |
good |
|
SnapScan e26 |
USB |
good |
|
SnapScan e40 |
USB |
good |
|
SnapScan e42 |
USB |
good |
|
SnapScan e50 |
USB |
good |
Optional tranparency unit supported |
SnapScan e52 |
USB |
good |
Optional tranparency unit supported |
SnapScan e60 |
USB |
untested |
|
Benq
| 300f |
SCSI |
good |
|
310s |
SCSI |
good |
|
610s |
SCSI |
good |
|
610plus |
SCSI |
good |
|
620s |
SCSI |
good |
|
310u |
USB |
good |
|
320u |
USB |
good |
|
340u |
USB |
good |
|
620u |
USB |
good |
Optional tranparency unit supported |
640u |
USB |
good |
Optional tranparency unit supported |
640bu |
USB |
good |
|
640BT |
USB |
good |
Optional tranparency unit supported |
1240 |
USB |
good |
Optional tranparency unit supported |
3300 |
USB |
good |
|
4300 |
USB |
good |
|
5000 |
USB |
basic |
Working up to 600 DPI |
5300 |
USB |
basic |
Problems with firmware upload reported |
Guillemot / Hercules
| Maxi Scan A4 Deluxe (SCSI) |
SCSI |
good |
Rebadged SnapScan 310s. |
Scan@home Touch 1248 (USB) |
USB |
good |
Rebadged Benq 3300. |
Maxi Scan A4 USB 640U |
USB |
good |
Rebadged Benq 640U. |
Maxi A4 36 bit |
USB |
good |
Rebadged Benq 620U, needs Benq firmware file u96v???.bin |
Mitsubishi
| Diamondview 648UT |
USB |
good |
Rebadged Benq 320u. |
Diamondview 650U |
USB |
good |
Rebadged Benq 4300. |
Epson
| Perfection 660 |
USB |
good |
|
Perfection 1670 |
USB |
good |
|
Manual page: sane-sp15c
Manufacturer |
Model |
Interface |
Status |
Comment |
Fujitsu
| SP15C |
SCSI |
good |
|
Link(s):
http://www.informatik.uni-oldenburg.de/~ingo/sane/
Manual page: sane-st400
Manufacturer |
Model |
Interface |
Status |
Comment |
Siemens
| ST400 |
SCSI |
basic |
6 bit gray |
ST800 |
SCSI |
basic |
6 bit gray |
Manual page: sane-tamarack
Manufacturer |
Model |
Interface |
Status |
Comment |
Tamarack
| Artiscan 6000C |
SCSI |
good |
3 pass, 300 DPI |
Artiscan 8000C |
SCSI |
good |
3 pass, 400 DPI |
Artiscan 12000C |
SCSI |
good |
3 pass, 600 DPI |
Link(s):
http://www.zago.net/sane/#teco
Manual page: sane-teco1
Manufacturer |
Model |
Interface |
Status |
Comment |
Relisys
| RELI 2412 |
SCSI |
complete |
sub model VM3530+ |
AVEC 2400 |
SCSI |
complete |
sub model VM3520 |
RELI 4830 |
SCSI |
good |
sub model VM4542 |
AVEC 2412 |
SCSI |
complete |
sub model VM3520+ |
AVEC 4800 |
SCSI |
untested |
sub model VM4530 |
AVEC 4816 |
SCSI |
untested |
sub model VM4530+ |
RELI DS6 |
SCSI |
untested |
sub model VM3420 |
RELI DS15 |
SCSI |
untested |
sub model VM3440 |
RELI 2400 |
SCSI |
untested |
sub model VM3530 |
RELI 4816 |
SCSI |
complete |
sub model VM4540 |
RELI 9600 |
SCSI |
untested |
sub model VM6530 |
RELI 9612 |
SCSI |
untested |
sub model VM6530* |
RELI 9624 |
SCSI |
untested |
sub model VM6530+ |
RELI 9630 |
SCSI |
untested |
sub model VM6540 |
Actown
| ACT Scan I 30 |
SCSI |
untested |
sub model VM3520A |
Dextra
| DF-600P |
SCSI |
good |
sub model VM3510 |
DF-1200T+ |
SCSI |
untested |
sub model VM3530+ |
DF-4830T |
SCSI |
untested |
sub model VM4542 |
DF-9624 |
SCSI |
untested |
sub model VM6530+ |
Link(s):
http://www.zago.net/sane/#teco2
Manual page: sane-teco2
Manufacturer |
Model |
Interface |
Status |
Comment |
Relisys
| AVEC Super 3 |
SCSI |
untested |
sub model VM3575 |
AVEC II S3 |
SCSI |
basic |
sub model VM3564 |
SCORPIO Super 3 |
SCSI |
basic |
sub model VM3575 |
APOLLO Express 3 |
SCSI |
basic |
sub model VM356A |
APOLLO Express 6 |
SCSI |
good |
sub model VM6565 |
SCORPIO Pro |
SCSI |
good |
sub model VM6575 |
SCORPIO Pro-S |
SCSI |
untested |
sub model VM6586 |
Primax
| Jewel 4800 |
SCSI |
basic |
sub model VM356A |
Profi 9600 |
SCSI |
basic |
sub model VM6575 |
Profi 19200 |
SCSI |
good |
sub model VM6586 |
Mustek
| ScanMagic 4830S |
SCSI |
untested |
sub model VM3575 |
Link(s):
http://www.zago.net/sane/#teco3
Manual page: sane-teco3
Manufacturer |
Model |
Interface |
Status |
Comment |
Relisys
| Infinity Scorpio |
SCSI |
good |
sub model VM3552 |
Plustek
| OpticPro 2400SP |
SCSI |
untested |
sub model VM3552 |
PIOTECH
| Splendeur 3024 |
SCSI |
good |
sub model VM3552 |
Trust
| Imagery 2400 SP |
SCSI |
good |
sub model VM3552 |
Imagery 4800 SP+ |
SCSI |
good |
sub model VM3552 |
Imagery 9600 SP |
SCSI |
untested |
sub model VM3552 |
Link(s):
http://www.gjaeger.de/scanner/u12.html
Manual page: sane-u12
Manufacturer |
Model |
Interface |
Status |
Comment |
Plustek
| OpticPro U12 |
USB |
basic |
Note: Only devices with product ID 0x0001 are supported! |
OpticPro UT12 |
USB |
basic |
Note: Only devices with product ID 0x0001 are supported! |
OpticPro 1212U |
USB |
basic |
|
RevScan
| RevScan Orange R48Ti |
USB |
basic |
Rebadged Plustek OpticPro UT12 |
Genius
| ColorPage HR6 V1 |
USB |
basic |
|
ColorPage Vivid III USB |
USB |
untested |
Note: Device has Plustek vendor and product ID (0x07b3/0x0001) |
Link(s):
http://www.rauch-domain.de/sane-umax/index.html
Manual page: sane-umax
Manufacturer |
Model |
Interface |
Status |
Comment |
UMAX
| Vista S6 |
SCSI |
good |
OK |
Vista S6E |
SCSI |
good |
OK |
UMAX S-6E |
SCSI |
good |
OK |
UMAX S-6EG |
SCSI |
good |
OK |
Vista-S8 |
SCSI |
good |
OK |
Supervista S-12 |
SCSI |
good |
OK |
UMAX S-12 |
SCSI |
good |
OK |
UMAX S-12G |
SCSI |
good |
OK |
Astra 600S |
SCSI |
good |
OK |
Astra 610S |
SCSI |
good |
OK |
Astra 1200S |
SCSI |
good |
OK |
Astra 1220S |
SCSI |
good |
OK |
Astra 2100S |
SCSI |
good |
OK |
Astra 2200 (SU) |
SCSI |
good |
OK |
Astra 2200 (SU) |
USB |
good |
OK, needs USB control messages |
Astra 2400S |
SCSI |
good |
OK |
Astra 6400 |
IEEE-1394 |
unsupported |
will propably work one day |
Astra 6450 |
IEEE-1394 |
unsupported |
will propably work one day |
Astra MX3 |
SCSI |
good |
OK |
Astra MX3 |
USB |
good |
OK, needs USB control messages |
Mirage D-16L |
SCSI |
good |
OK |
Mirage II |
SCSI |
good |
OK |
Mirage IIse |
SCSI |
good |
OK |
PSD |
SCSI |
good |
OK |
PowerLook |
SCSI |
good |
OK, SCSI-ID=PS-2400X |
PL-II |
SCSI |
good |
OK |
PowerLook III |
SCSI |
good |
OK |
PowerLook 270 |
SCSI |
unsupported |
incompatible |
PowerLook 270plus |
SCSI |
unsupported |
incompatible |
PowerLook 1100 |
IEEE-1394 |
unsupported |
will propably work one day |
PowerLook 2000 |
SCSI |
good |
OK |
PowerLook 2100XL |
SCSI |
good |
OK |
PowerLook 3000 |
SCSI |
good |
OK |
Gemini D-16 |
SCSI |
good |
OK |
UMAX VT600 |
SCSI |
untested |
may work, please test and give feedback |
Vista-T630 |
SCSI |
good |
OK for some firmwareversions, on others only lineart OK |
UC 630 |
SCSI |
good |
Version 2.8 OK, others only lineart OK |
UG 630 |
SCSI |
good |
OK |
UG 80 |
SCSI |
good |
OK |
UC 840 |
SCSI |
good |
Version 1.6 OK, others only lineart OK |
UC 1200S |
SCSI |
untested |
may work, please test and give feedback |
UC 1200SE |
SCSI |
good |
Version 3.0 OK, others unknown |
UC 1260 |
SCSI |
good |
Version 1.6 OK, others unknown |
Linotype Hell
| Jade |
SCSI |
good |
OK, SCSI-ID=LinoHell Office |
Jade |
SCSI |
good |
OK, SCSI-ID=LinoHell JADE |
Jade2 |
SCSI |
good |
OK, SCSI-ID=LinoHell Office2 |
Saphir |
SCSI |
untested |
support disabled until tested - please contact author |
Saphir2 |
SCSI |
good |
OK, SCSI-ID=LinoHell SAPHIR2 |
Saphir3 |
SCSI |
good |
OK, SCSI-ID=LinoHell SAPHIR3 |
Saphir Ultra |
SCSI |
untested |
support disabled until tested - please contact author |
Saphir Ultra II |
SCSI |
good |
OK, SCSI-ID=Linotype SAPHIR4 |
Saphir HiRes |
SCSI |
untested |
support disabled until tested - please contact author |
Opal |
SCSI |
untested |
support disabled until tested - please contact author |
Opal Ultra |
SCSI |
untested |
support disabled until tested - please contact author |
Linoscan 1400 |
SCSI |
good |
OK, SCSI-ID=HDM LS4H1S |
Vobis
| Highscreen Scanboostar Premium |
SCSI |
good |
OK, SCSI-ID=LinoHell Office2 |
EDGE
| KTX-9600US |
SCSI |
untested |
no feedback |
Epson
| Perfection 600 |
SCSI |
good |
OK, SCSI-ID=EPSON Perfection600 |
Escom
| Image Scanner 256 |
SCSI |
good |
OK, SCSI-ID=UMAX UG 80 |
Escort
| Galleria 600 |
SCSI |
untested |
untested, SCSI-ID=ESCORT Galleria 600S |
Genius
| ColorPage-HR5 (Pro) |
SCSI |
good |
OK, SCSI-ID=KYE ColorPage-HR5 |
Nikon
| AX-110 / Scantouch 110 |
SCSI |
untested |
may work, please test and give feedback |
AX-210 |
SCSI |
good |
OK |
TriGem
| PowerScanII |
SCSI |
good |
OK |
Link(s):
http://umax1220u-sane.sourceforge.net
Manual page: sane-umax1220u
Manufacturer |
Model |
Interface |
Status |
Comment |
UMAX
| Astra 1220U |
USB |
good |
OK |
Astra 1600U |
USB |
minimal |
Is reported to be the same as the 2000U. Sort of scans, but colors all messed up. |
Astra 2000U |
USB |
minimal |
Sort of scans, but colors all messed up. |
Link(s):
http://umax1220p.sourceforge.net/
Manual page: sane-umax_pp
Manufacturer |
Model |
Interface |
Status |
Comment |
UMAX
| Astra 1220P |
Parport (EPP/ECP) |
good |
|
Astra 2000P |
Parport (EPP/ECP) |
good |
|
Astra 1600P |
Parport (EPP) |
good |
|
Astra 600P |
Parport (sPP/ECP) |
unsupported |
untested, but should be close to 610P |
Astra 610P |
Parport (SPP/ECP) |
minimal |
work in progress |
Hewlett-Packard
| Scanjet 3200C |
Parport (EPP/ECP) |
good |
works (relabelled 1220P and 2000P) |
Link(s):
/contrib.html
Comment: The devices mentioned here are not supported by any SANE backend. However, there may be links to information about them or stand-alone programs.
Manufacturer |
Model |
Interface |
Status |
Comment |
Agfa
| 1212 P |
Parport |
unsupported |
Most probably unsupported. |
DuoScan f40 |
USB IEEE-1394 |
unsupported |
Unsupported. See link for details. |
DuoScan T2000XL |
SCSI |
unsupported |
Unsupported. Same as Microtek ArtixScan 2020? |
DuoScan T2500 |
SCSI IEEE-1384 |
unsupported |
Unsupported. Same as Microtek Artixscan 2500f |
Artec/Ultima
| 1236 USB |
USB |
unsupported |
Unsupported. Vendor/product 0x05d8/0x4001. See link for details. |
AM12e+ |
Parport |
unsupported |
Unsupported. Chipset unknown. Maybe similar to SCSI version or as6e? |
E+ Pro |
USB |
unsupported |
Not supported. Work is ongoing to support it by the artec_eplus48u backend. See link for details.. |
Ultima 2000 (0x4001) |
USB |
unsupported |
Same name, but different ids: vendor/product 0x05d8/0x4001 is not supported. The scanner with product id 0x4002 is supported by the gt68xx backend. |
Avigramm
| Minidoc |
USB |
unsupported |
Not supported. See link for details. |
Avision
| iVina FB2400 |
USB |
unsupported |
Not supported. No chipset information available. Same as UMAX Astra 6700. |
Benq
| 310p |
Parport |
unsupported |
Unsupported. No details about the protocol known. |
610p |
Parport |
unsupported |
Unsupported. No details about the protocol known. |
620p |
Parport |
unsupported |
Unsupported. No details about the protocol known. |
620pt |
Parport |
unsupported |
Unsupported. No details about the protocol known. |
640p |
Parport |
unsupported |
Unsupported. Someone is working to ge this scanner supported. See link for details. |
Boeder
| Sm@rtScan Office |
Parport USB |
unsupported |
Unsupported. See link for details. |
Brother
| DCP 8020 |
USB |
unsupported |
Unsupported. See link for details. |
MFC 4600 |
Parport USB |
unsupported |
Unsupported. However there is a project to support this scanner/printer/fax combination. See link. |
MFC 5100c |
Parport USB |
unsupported |
Unsupported. Some information is available (see link). See also MFC 4600. |
MFC 6800 |
USB |
unsupported |
Unsupported. A backend is under development (see link). Vendor/product 0x04f9/0x0111. See also MFC 4600. |
MFC 9160 |
USB Parport |
unsupported |
Unsupported. Maybe it's similar to the other Brother MFCs? |
Canon
| CanoScan 3000 |
USB |
unsupported |
Probably unsupported. See link. |
CanoScan 3000F |
USB |
unsupported |
Probably unsupported. See link. |
CanoScan 3200F |
USB |
unsupported |
Probably unsupported. See link. |
CanoScan 5000F |
USB |
unsupported |
Probably unsupported. See link for details. |
CanoScan 8000F |
USB |
unsupported |
Not supported. USB Vendor/product 0x04a9/0x220f. See link for more information. With transparency adapter. |
CanoScan 9900F |
USB |
unsupported |
Probably unsupported, similar to 8000F. Vendor/product 0x04a9/0x2210. 3200x6400 dpi USB2. With transparency adapter. |
CanoScan D646U |
USB |
unsupported |
Probably not supported. USB Vendor/product 0x04a9/0x220b. See link for more information and test program. |
CanoScan D646U ex |
USB |
unsupported |
Probably not supported. No further details known. |
CanoScan D1250U2 |
USB |
unsupported |
Not supported. However, someone started working on this scanner and some information is available (see link). |
CanoScan D2400UF |
USB |
unsupported |
Not supported. See link. |
CanoScan FB620U |
USB |
unsupported |
Probably not supported. Vendor/product 0x4a9/0x2202. Some information is available. |
CanoScan FB1210U |
USB |
unsupported |
Not supported. Vendor/product 0x4a9/0x2205. However, a stand-alone program for FreeBSD is available. |
DR-2080C |
USB SCSI |
unsupported |
Probably not supported. Pass-trough (ADF) scanner. |
DR-3020C |
SCSI |
unsupported |
Not supported. High-speed pass-trough (ADF) scanner. |
DR-3060 |
SCSI |
unsupported |
Probably not supported. High-speed pass-trough (ADF) scanner. |
DR-3080C |
SCSI |
unsupported |
Probably not supported. High-speed pass-trough (ADF) color scanner. |
DR-6080 |
SCSI |
unsupported |
Probably not supported. High-speed pass-trough (ADF) scanner. |
DR-9080C |
SCSI |
unsupported |
Probably not supported. High-speed pass-trough (ADF) color scanner. Similar to DR-6080C, but can scan in color. |
FS4000 |
USB SCSI |
unsupported |
Not supported. USB Vendor/product 0x04a9/0x3042. See link for more details. |
IS 12 |
USB |
unsupported |
Probably not supported. This scanner is used in a number of Canon portable printers (BJC-80 for one). No further information available. |
IS 32 |
USB |
unsupported |
Probably not supported. Scanner cardridge for Canon inkjet printers. |
Compaq
| S200 |
USB |
unsupported |
Not supported. 2400x1200 dpi. Vendor=0x049f, Product=0x0021. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00 |
S4 100 |
USB |
unsupported |
Not supported. Vendor=0x049f, Product=0x001a. |
Corex
| Cardscan 500 |
USB |
unsupported |
Probably not supported. Businesscard reader. Vendor/product: 0x08f0/0x0001. |
Epson
| GT-7400U |
USB |
unsupported |
Probably unsupported. May work with snapscan backend after some modification. See link for details. |
Perfection 1270 |
USB |
unsupported |
Probably unsupported. May work with snapscan backend after some modification. See link for details. |
Perfection 3170 |
USB |
unsupported |
Probably unsupported. Support is planned by the (external) epkowa backend. Seems to neither use Epson nor Benq protocol. Details appreciated. |
Stylus Photo RX500 |
USB |
unsupported |
Probably unsupported. See link for details. |
E-Lux
| j-6121 |
Parport |
unsupported |
Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
Enhans
| j-6121 |
Parport |
unsupported |
Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
M-3630 A |
Parport |
unsupported |
Probably unsupported. |
Fujitsu
| fi-4010C |
USB |
unsupported |
Unsupported. Vendor/product: 0x04c5, 0x1029. Maybe similar to fi-4220C? |
fi-4110CU |
USB |
unsupported |
Unsupported. Vendor/product unknown. Maybe similar to fi-4220C? |
Genius
| ColorPage-EP |
Parport |
unsupported |
Not supported. No details known. |
Colorpage Vivid 1200 XE |
USB |
unsupported |
Not supported yet. May work with the gt68xx backend in future. See link for details. |
Guillemot
| SCAN@HOME 48 USB |
USB |
unsupported |
Probably unsupported. See link for details. |
Hercules
| SCAN@HOME 48 USB |
USB |
unsupported |
Probably unsupported. See link for details. |
Hewlett-Packard
| Photo Scanner 1000 |
USB |
unsupported |
Not supported by SANE. However, it's detected as mass storage device so just mounting it is reported to work. See link for devices data. |
Photosmart 1200 Photo |
USB |
unsupported |
Probably not supported by SANE. No details known. 10x15 cm. Maybe similar to Photo Scanner 1000? |
Photosmart S20 (C5101A) |
USB |
unsupported |
Not supported yet by SANE, but a backend is under development. See link for details. |
Photosmart S20xi (C7150A) |
USB |
unsupported |
Not supported yet by SANE, but a backend is under development. See link for details. |
ScanJet 2300C |
USB |
unsupported |
Unsupported. See link for details. |
ScanJet 3970c |
USB |
unsupported |
Unsupported. See link for details. |
ScanJet 4600 |
USB |
unsupported |
Not supported. See link for details. |
ScanJet 4670 |
USB |
unsupported |
Not supported. See link for details. |
ScanJet 8200C |
USB |
unsupported |
Not supported. See link for details. |
ScanJet 8250C |
USB |
unsupported |
Not supported. SCSI optional. Includes ADF and TA. Probably similar to 8200C. No further information. |
ScanJet 8290C |
USB |
unsupported |
Not supported. See link for details. |
IBM
| ADF Color Scanner |
Proprietary |
unsupported |
Unsupported. Uses proprietary ISA card. Maybe the same as the Plustek Spectra ADF? |
Lexmark
| X74 |
USB |
unsupported |
Unsupported. See link for details. |
X75 |
USB |
unsupported |
Unsupported. See link for details. |
X83 |
USB |
unsupported |
Unsupported. Vendor/product 0x043d/0x003d. GL640. |
X1150 |
USB |
unsupported |
Unsupported. |
X5130 |
USB |
unsupported |
Unsupported. |
Logitec
| PageScan Color |
Parport |
unsupported |
Most probably unsupported. |
Medion/Lifetec/Tevion/Cytron
| MD 6190 |
USB |
unsupported |
Probably unsupported. There seem to exist two different scanners with that name. See link for details. |
MD 40420 |
USB |
unsupported |
Probably unsupported. See link for details. |
MD 41260 |
USB |
unsupported |
Probably unsupported. See link for details. |
Memorex
| 6136u |
USB |
unsupported |
Probably unsupported. |
6142u |
USB |
unsupported |
Probably unsupported. Same as Visioneer Onetouch 4400. See link for details. |
Microtek
| ArtixScan 2020 |
SCSI |
unsupported |
Unsupported. Same as Agfa DuoScan T2000XL? |
Artixscan 2500f |
SCSI IEEE-1384 |
unsupported |
Unsupported. Same as Agfa DuoScan T2500? |
ScanMaker 336 CX |
SCSI |
unsupported |
Probably unsupported. Seems to be similar to the Microtek 330 CX and is detected by the microtek2 backend. Scanning doesn't seem to work however. |
ScanMaker 3630 |
USB |
unsupported |
Unsupported. Doesn't seem to be compatible to 3600 series, see link. |
ScanMaker 3800 |
USB |
unsupported |
Unsupported. See link for more details. |
ScanMaker 3830 |
USB |
unsupported |
Unsupported. See link for more details. |
ScanMaker 3840 |
USB |
unsupported |
Unsupported. See link for more details. |
ScanMaker 4700 |
USB |
unsupported |
Unsupported. See link for more details. |
ScanMaker 4800 |
USB |
unsupported |
Unsupported. Vendor/Product ids: 0x05da/0x30cf. SQ Scan08? See link for more details. |
ScanMaker 4850 |
USB |
unsupported |
Probably unsupported. |
ScanMaker 4900 |
USB |
unsupported |
Unsupported. See link for more details. |
ScanMaker 5600 |
USB |
unsupported |
Unsupported. See link for more details. |
ScanMaker 5900 |
USB |
unsupported |
Unsupported. See link for more details. |
ScanMaker 6700 |
USB IEEE-1394 |
unsupported |
Unsupported. See link. |
ScanMaker 8700 |
USB IEEE-1394 |
unsupported |
Unsupported. See link for details. |
ScanMaker 9600XL |
USB SCSI IEEE-1394 |
unsupported |
Probably unsupported. |
ScanMaker 9800XL |
USB SCSI IEEE-1394 |
unsupported |
Unsupported. See link. |
ScanPort 3000 |
USB |
unsupported |
Unsupported. Vendor/Product ids: 0x04a7/0x0224. Realtek RTS8801B?. See link for details. |
Minolta
| Dual Scan III |
USB |
unsupported |
Unsupported. May work with vuescan. See link for details. |
DiMAGE Scan Elite 5400 |
USB IEEE-1394 |
unsupported |
Probably unsupported. May work with vuescan. See link for details. |
Mustek
| 1800 A3 Pro-1 |
USB |
unsupported |
Not supported but someone wants to start writing a backend. See link. Vendor/Product ids: 0x055f/0x0401. No information about this scanner on any Mustek website. |
2400 M |
USB |
unsupported |
Probably unsupported. No details known. |
BearPaw 1248CU |
USB |
unsupported |
Probably unsupported. No details known. |
BearPaw 2400 TA Pro |
USB |
unsupported |
Not supported. See link for some information. |
BearPaw 2448 CU Pro |
USB |
unsupported |
Not supported. See link for some information. |
BearPaw 2448 TA Pro |
USB |
unsupported |
Not supported. See link for some information. |
BearPaw 4800 TA Pro |
USB |
unsupported |
Not supported. See link for some information. |
BearPaw 4800 TA Pro II |
USB |
unsupported |
Not supported. See link for some information. |
P 3600 A3 Pro |
USB |
unsupported |
Not supported. Maybe similar to the 1800 A3 Pro-1?. See link. |
Paragon 800 II EP |
USB |
unsupported |
Not supported. Maybe similar to 600 II EP (SCSI_over-parport)? In this case it could be supported by the mustek SCSI backend. |
ScanExpress 600 USB |
USB |
unsupported |
Unsupported. Vendor/Product 0x055f/0x873. Programming information is available. |
ScanExpress 1200 USB |
USB |
unsupported |
Unsupported. Vendor/Product 0x055f/0x0003. Programming information is available. |
ScanExpress 1200 USB Plus |
USB |
unsupported |
Unsupported. Vendor/Product 0x055f/0x0007. |
ScanExpress 12000 P |
Parport |
unsupported |
Not supported. Asic 1505/05. |
ScanExpress A3 EP |
Parport |
unsupported |
Not supported. Maybe it will be supported by the mustek_pp backend in future. |
ScanExpress CardSmart |
USB |
unsupported |
Probably unsupported. USB business card scanner. Maybe works as USB storage device? |
ScanMagic 9636P |
Parport |
unsupported |
Probably not supported. Same as Mustek 12000 P?. ASIC 1505. |
Nikon
| LS 50 ED |
USB |
unsupported |
Most probably unsupported. See link for details. |
Optrox
| PhotoMaker 3 |
Parport |
unsupported |
Probably not supported. |
Pentax
| DSmobile USB |
USB |
unsupported |
Probably not supported. Some information is available. |
PIE
| Primefilm 1800u |
USB |
unsupported |
Not supported. Vendor/product 0x05e3/0x0120. See link for details. |
Primefilm 3600PRO |
USB IEEE-1394 |
unsupported |
Probably not supported. |
Powerslide 3600 |
USB IEEE-1394 |
unsupported |
Probably unsupported. Film scanner that can scan directly from the magazine. |
Plustek
| OpticPro A3U |
USB |
unsupported |
Uses Plustek ASIC P99002 |
OpticPro S6 |
USB |
unsupported |
Uses RealTek chipset (RTL8801D) |
OpticPro UA18 |
USB |
unsupported |
Probably LM983x based. |
Spectra ADF |
Proprietary |
unsupported |
Unsupported. Uses proprietary ISA card that also provides power and is labelled GPS-1 PAGE-A from Taiwan. Other labels on the scanner include ADF Color Scanner and SF600AS. Maybe the same as the IBM ADF Color Scanner? |
Primax
| Colorado 600U |
USB |
unsupported |
Not supported. Some information is available. |
Colorado 2400U |
USB |
unsupported |
Probably unsupported. See link for details. |
Primascan Colorado 2600u |
USB |
unsupported |
Unsupported. Same as Visioneer Onetouch 4400. See link for details. |
Colorado Direct 600 |
Parport |
unsupported |
Not supported. However, a stand-alone program is available. |
Colorado Direct 9600 |
Parport |
unsupported |
Not supported. However, a stand-alone program is available. |
Prolink
| Winscan Pro 2448U |
USB |
unsupported |
Not supported. Some information is available. Vendor=0x06dc product=0x0014. RealTek RTS8801. |
Quato
| X-Finity |
SCSI |
unsupported |
Probably not supported. No details yet. Originally manufactured by PFU? |
X-Finity Ultra |
USB IEEE-1394 |
unsupported |
Probably not supported. No details yet. |
Reflecta
| DigitDia 3600 |
USB IEEE-1394 |
unsupported |
Probably unsupported. Film scanner that can scan directly from the magazine. |
iScan 1800 |
USB |
unsupported |
Probably unsupported. See link for details. |
ProScan 4000 |
USB IEEE-1394 |
unsupported |
Probably unsupported. See link for details. |
Relisys
| Eclipse 1200U |
USB |
unsupported |
Probably unsupported. See link for details. |
Scorpio Ultra 3 |
USB |
unsupported |
Probably unsupported. See link for details. |
Episode |
USB |
unsupported |
Probably unsupported. See link for details. |
Sicos
| DMS 2000 |
proprietary |
unsupported |
Not supported until now. Work on a backend has started, contact the author for details (see link) |
SmartScan 3600 |
USB IEEE-1394 |
unsupported |
Probably not supported. Same as PIE Primefilm 2600 PRO. |
Spot Technology
| Maxiscan A4 |
proprietary |
unsupported |
Not supported until now. Work on a backend has started, see link for more information. |
ScanTak 2c |
proprietary |
unsupported |
Not supported. Work on a backend has started, see link for more information. |
ScanTak 3c |
proprietary |
unsupported |
Not supported. Work on a backend has started, see link for more information. |
Syscan
| TravelScan 460/464 |
USB |
unsupported |
Not supported. Some information is available. May work with the Plustek backend in future. |
TravelScan Pro |
USB |
unsupported |
Probably not supported. Some information is available. |
Tamarack
| Artiscan 9600 pro 36 |
Parport |
unsupported |
Unsupported. Someone wants to write a backend. See link. |
TCE
| MK600U |
USB |
unsupported |
Not supported. Some information is available. |
S450 |
Parport |
unsupported |
Not supported by SANE but is reported to work with pxscan (see link). |
Teco
| VM6509F |
USB |
unsupported |
Probably unsupported. See link for details. |
Trust
| CombiScan 19200 |
Parport USB |
unsupported |
Unsupported. See link for details. |
UMAX
| Astra 2100 U |
USB |
unsupported |
Probably not supported. See link for details. |
Astra 3000 |
USB |
unsupported |
Probably not supported. See link for details. |
Astra 3600 |
USB |
unsupported |
Probably not supported. See link for details. |
Astra 4000 |
USB |
unsupported |
Probably not supported, no details known. |
Astra 4400 |
USB |
unsupported |
Probably not supported. See link for details. |
Astra 4450 |
USB |
unsupported |
Probably not supported. See link for details. |
Astra 4600 |
USB |
unsupported |
Probably not supported, no details known. |
Astra 6700 |
USB |
unsupported |
Not supported. No chipset information available. Same as Avision iVina FB2400. |
AstraSlim |
USB |
unsupported |
Probably not supported currently. See link for more details. |
AstraSlim 1200 SE |
USB |
unsupported |
Probably not supported currently. May be supported in future. See link for more details. |
Powerlook 1000 USB |
USB |
unsupported |
Probably not supported. No further information available. |
Vantas
| 3000 |
USB |
unsupported |
Not supported. See link for more details. |
Visioneer
| 6200 |
USB |
unsupported |
Not supported. Is reported to use the E5 chipset. Uses a Primax ID. See link for some details. Looks similar to Primascan Colorado 2600u. |
Onetouch 4400 |
USB |
unsupported |
Not supported. E5 chipset? Vendor/product 0x0461/0x0347.See link for more details. |
OneTouch 4800 USB |
USB |
unsupported |
Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details. |
OneTouch 5300 USB |
USB |
unsupported |
Not supported. Vendor/product ids 0x04a7/0x0226. Chipset is RTS8801B(?). See link for output of /proc/bus/usb/devices. |
OneTouch 5800 USB |
USB |
unsupported |
Unsupported. 48 bit scanner, doesn't work with viceo backend. RTS8801C. Vendor/product 0x04a7/0x0226. |
OneTouch 8100 |
USB |
unsupported |
Unsupported. See link for details. |
Onetouch 8700 |
USB |
unsupported |
Not supported. See link for details. |
Onetouch 8900 |
USB |
unsupported |
Not supported. Same as 8920 but without TA? |
Onetouch 8920 |
USB |
unsupported |
Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. Chipset is RTS8801C. See link for output of /proc/bus/usb/devices. |
Onetouch 9020 |
USB |
unsupported |
Not supported. Vendor/product: 0x04a7/0x022c. |
Onetouch Pro 8820 |
USB |
unsupported |
Probably not supported. See link for details. |
PaperPort 3100b |
Parport |
unsupported |
Most probably not supported. More details would be appreciated. |
PaperPort 6100 |
Parport |
unsupported |
Most probably not supported. More details would be appreciated. |
Primascan Colorado 2600u |
USB |
unsupported |
Not supported. See Visioneer Onetouch 4400. |
Xerox
| WorkCentre XK35c |
USB Parport |
unsupported |
Not supported. See link for more details. |
WorkCentre Pro 412 |
USB Parport |
unsupported |
Not supported. See link for more details. |
Backends:
dc25,
dc210,
dc240,
dmc
Link(s):
mailto:peter@fales-lorenz.net
Manual page: sane-dc25
Manufacturer |
Model |
Interface |
Status |
Comment |
Kodak
| DC25 |
Serial port |
complete |
|
DC20 |
Serial port |
basic |
DC-20 untested by author but reported to work |
Link(s):
mailto:peter@fales-lorenz.net
Manual page: sane-dc210
Manufacturer |
Model |
Interface |
Status |
Comment |
Kodak
| DC210 |
Serial port |
basic |
|
Link(s):
mailto:peter@fales-lorenz.net
Manual page: sane-dc240
Manufacturer |
Model |
Interface |
Status |
Comment |
Kodak
| DC240 |
Serial port |
good |
Use gphoto2 backend to get USB support |
Manual page: sane-dmc
Manufacturer |
Model |
Interface |
Status |
Comment |
Polaroid
| DMC |
SCSI |
good |
|
Backends:
qcam,
unsupported
Manual page: sane-qcam
Manufacturer |
Model |
Interface |
Status |
Comment |
Connectix
| Color QuickCam |
Parport |
good |
Requires root privileges. |
Greyscale QuickCam |
Parport |
minimal |
Requires root privileges. Partly working. |
Link(s):
/contrib.html
Comment: The devices mentioned here are not supported by any SANE backend. However, there may be links to information about them or stand-alone programs.
Manufacturer |
Model |
Interface |
Status |
Comment |
Biolux
| 654 (micrOcular) |
USB |
unsupported |
Not supported yet. See link for more details. |
Backends:
gphoto2,
pint,
pnm,
test,
v4l
Link(s):
mailto:peter@fales-lorenz.net
Manual page: sane-gphoto2
Description: Multiple cameras supported by the gphoto2 libraries
Comment: The long-term plan is to support all the cameras supported by the gphoto2 libraries (currently over 140 models). However, at this stage, only a handful of cameras are definitely known to work with SANE. Other cameras will probably work if the native file format is EXIF or JPEG. Testers welcome!
Manual page: sane-pint
Description: Scanners with the machine-independent PINT interface
Comment: Haven't been tested for a long time. Handle with care.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-pnm
Description: Reads PNM files
Comment: Used for debugging frontends. Obsolete, use test backend instead.
Link(s):
http://www.meier-geinitz.de/sane/test-backend/
Manual page: sane-test
Description: Frontend-tester
Comment: Backend for testing frontends. Also serves as example for SANE backend options.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-v4l
Description: Interface to Video For Linux API
Comment: Supports video cameras and other devices accessed by the v4l kernel API, e.g. bttv devices. Quite a lot of known bugs.
Backends:
dll,
net
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-dll
Description: Dynamic loading of shared-library backends.
Link(s):
http://www.penguin-breeder.org/?page=sane-net
Manual page: sane-net
Description: Network access to saned servers
Comment: Can be used to access any scanner supported by SANE over the net. Supports IPv4 and IPv6.
- Backend:
- Name of the backend, in parentheses if available:
Version of backend/driver; newer versions may be
available from their home sites.
NEW! means brand-new to the
current release of SANE.
UNMAINTAINED means that nobody maintains that backend. Expect no
new features or newly supported devices. You are welcome to take over
maintainership.
- Link(s):
- Link(s) to more extensive and
detailed information, if it exists, or the email address
of the author or maintainer.
- Manual Page:
- A link to the man-page online, if it exists.
- Comment:
- More information about the backend or model, e.g. the level of support and possible problems.
- Manufacturer:
- Manufacturer, vendor or brand name of the device.
- Model:
- Name of the the device.
- Interface:
- How the device is connected to the computer.
- Status:
- Indicates how many of the features the device provides
are supported by SANE.
- unsupported means the device is not supported at least by this backend. It may be supported by other backends, however.
- untested means the device may be supported but couldn't be tested. Be very careful and report success/failure.
- minimal means that the
device is detected and scans at least in one mode. But the quality
is bad or important features won't work.
- basic means it works at
least in the most important modes but quality is not perfect.
- good means the device is usable
for day-to-day work. Some rather exotic features may be missing.
- complete means the backends
supports everything the device can do.
- Description:
- The scope of application of the backend.
SANE homepage
Contact
This page was last updated on Sun Nov 21 21:20:55 2004
|